Electric Optics Split EL Tape By The Foot 1

5 feet of Split EL Tape - 18" Width (Indoor or Outdoor)

Electric Optics Split EL Tape By The Foot 2

5 feet of Split EL Tape - 30" Width (Indoor or Outdoor)

5 feet of Split EL Tape - 2" Width (Indoor or Outdoor)

Split EL Tape By The Foot 2" Wide in Indoor Grade is a great way to illuminate hallways, parking garages, or the outside of a building. Works great with stairs and other
$154.49
Availability: In stock
SKU
LTE020
5 feet of Split EL Tape - 2" Width (Indoor or Outdoor) is available to buy in increments of 5

** PLEASE NOTE SPLIT TAPE MUST BE ORDERED IN INCREMENTS OF 5, 10, 15 or 25FT. Example: if 40 feet is ordered, you will receive a 15 and 25 foot section separately. Please contact us if you need specific lengths beyond this. **

Split EL Tape By The Foot 2" Wide is now available in as much or as little as you like. Indoor grade Split EL Tape is great for costumes, lining a hallway, or stage lighting. Its bright, even glow is perfect for stage performances and has been featured across Hollywood. Split EL Tape has a light output of about 30-35 Foot Lamberts which is about double the brightness over our previous version.

This tape is perfect for hallways, movie sets, bars, stair lighting, or to wear out at night to be seen. This tape runs off of a different frequency than our EL Wire Inverters and Battery Packs, so make sure you order either the correct Split 9V EL Tape Battery Pack or Split EL Tape Inverter. These specialized inverters runs off of a different voltage and frequency which allows a brighter tape, as well as longer battery life. Over time, your tape will last longer with our specially crafted inverters as well. The one downside is that our Split EL Tape Inverters do NOT work in conjunction with EL Wire.

2" Wide Split EL Tape has a glowing surface of 2" and an overall width of 2.5".

Please Note: EL Tape By The Foot Does Not Come With The Connection Made. The connection does require the use of a soldering iron.

MAKE SURE TO GET A SPLIT EL TAPE INVERTER!! PARALLEL INVERTERS WILL MAKE YOUR TAPE 1/4 THE BRIGHTNESS.

If you need a Molex Connection assembled for you please click here. Also check out our new Split Tape Connectors here!

More Information
Manufacturer Light Tape
Specs
  • Extremely easy to install
  • Generates very little or almost no heat
  • Consumes less power (up to 93% less power)
  • Thin and flexible, typical thickness of 0.020 in (0.5 mm)
  • No glass to break or gas to escape
  • Provides uniform lighting over a large area as long as 300 feet (91 m)
  • Available in multiple colors
  • Can be mounted conformably on curved surfaces
  • Can be designed to flash selectively or sequentially
  • Interior and exterior capable (when selected)
  • No maintenance
SKU LTE020
Product Video N/A
Write Your Own Review
You're reviewing:5 feet of Split EL Tape - 2" Width (Indoor or Outdoor)
Your Rating
electroluminescence