OpalDrive Laser Wire™ 2.5M System

Laser Wire® 2.5M System

ICE Cool White Opal Drive Laser Wire™ System

ICE Laser Wire® System - Cool White

Laser Wire® SUPER POP 1M System

100% of 100
This one meter cable allows for bold accent lighting over short distances. Unlike anything else on the market, Laser Wire® Systems are completely silent, and they outlast Electroluminescent technology. You can use Laser Wire® Cabling without losing brightness, for years and years to come!
Availability: In stock
The Opal Drive 1M Laser Wire® System is the perfect addition to any project if the goal is to achieve increased brightness over a shorter span of cabling. The One Meter Laser Wire® System allows you to make a bold impact, even when you have a short distance to work with. With the purchase of this ready-made kit, you will receive an Opal Drive Module which is powered by a lithium ion rechargeable battery. The Red Laser Wire® Module will stay powered on a full charge for up to 24 hours. Green and Blue modules last 8-12 hours on a full charge. There are 3 modes on the device that you can toggle between. These modes allow you the ability to switch between blink, fade, and constant on modes. The slide switch on the Opal Drive also allows for versatility if you want to install the Laser Wire™ System in a more permanent solution. You can simply slide the switch to toggle between battery and installation modes. This lets you choose where you put your module, and the best way to use it for your specific situation. The Laser Wire™ System is an all in one solution for events, trade shows, retail applications, costuming, and so much more.

Laser Wire® brand cable is the brightest lighted cable, consuming the lowest Watts per foot, the lightest weight, most robust, brilliantly colored and flexible cable in the world. Images can't do this product justice. Pick up a Laser Wire® Kit in your favorite color and prepare to use it on everything.

The OpalDrive module includes a rechargeable lithium ion battery which stays powered for up to 20 hours on a single charge (blinking/red). With 3 modes, blink, fade and constant on, the OpalDrive Laser Module is an all-in-one solution for event, trade shows, retail applications, costuming, consumer products and much more! Slide switch on the module allows you to toggle between battery and install mode, where it can be plugged in and run for weeks, months or years on end. The OpalDrive laser module is an all-in one laser module that allows you to use in battery mode, or in "installation mode", where it accepts a PWM frequency to operate. If you plan to plug in the OpalDrive to use wall, computer or automotive 5v power, you'll want to buy the optional OpalDrive Installation Cable as well. If you would like to use it with DMX, we also have DMX Inversion Cables available for purchase.

Estimated Battery Runtime For OpalDrives varies depending on the color. Each color draws a different amount of power. On a Full Battery Charge, the time you can expect it to illuminate before needing to be recharged is as follows:
Blue - 5-10 hours
Green - 4-8 hours
Red - 10-20 hours

Due to popular demand, we recently released a new laser module; The Capsule Module. The Capsule Module is a perfect module if you are looking to plug in your Laser Wire® to a 5V source, like wall outlet, laptop, car, or a portable power bank battery. This type of module will run in constant ON mode when it is hooked up to power. It's smaller than our OpalDrives, lightweight, compact and easy to use. This module has more heat sinking than the OpalDrive so we find that if using in Retail or Trade Show Displays, or for long periods of continuous use, the Capsule Module is a great fit. The biggest difference between the OpalDrive and the Capsule Module is that the Capsule module doesn't have an internal battery. Both Laser Modules will be the same color and brightness. Capsule Modules will also work with DMX as well via an inversion cable that can be purchased through our site.

Both choices of Laser Modules are awesome, so choose the best fit for your application. Simply select the laser module type you wish to use in the drop-down menu before adding the product to your cart!

More Information
Manufacturer Future Illuminations

Laser Wire® brand cable Length: 1 Meter (3.28ft)

Laser Wire® brand cable Diameter: 0.9mm (900um)

Opal Drive Dimensions: 4.17" x 1.00" x 0.90"
Input Voltage: 5V DC
Output Voltage: 5V DC
Laser Power: 20mW
Laser Class: Class 3R (No USA Variance Required)

Product Video
Write Your Own Review
You're reviewing:Laser Wire® SUPER POP 1M System
Your Rating