DualDrive Multicolored 15M ACCENT Laser Wire® System
The purchase of a DualDrive Laser Wire® Systems allow you to change the color of your cabling. The Accent Profile of cabling is a specifically ideal solution for any project that demands a long length of With Laser Wire™ Cabling. Your unique vision can stand apart from the rest, especially when comparing the even illumination of Laser Wire® systems to side emitting fiber optics. DualDrive Laser Lighting Solutions allow the user to create unique patterns and color gradients along the full span of the cabling. We like to call Laser Wire® Products the future of EL Wire. A Laser Wire™ System is everything that EL Wire is, plus so much more. It is also completely silent in operation, so you don’t have to worry about the high pitched humming sound emission from an Electroluminescent inverter anymore. Laser Wire® Systems offer an increased brightness and durability that Electroluminescent technology can’t match.
With the purchase of our 15 meter DualDrive Kit, you will have access to a simple plug and play solution for smooth color transitions. With a bending radius of 5mm and a diameter of 1mm, Laser Wire® Cabling proves to be a sleek, bright, and superior. It is the perfect solution for an array of accent lighting projects. We guarantee a brightness that far exceeds Electroluminescent Technology and a Cabling the can be exposed to ultraviolet sun rays, without worrying that the brightness will deteriorate over time. Exposure to the elements is a factor that does contribute to a decrease in brightness overtime when using Electroluminescent Technology, which is something to keep in mind.
Dual Drive Laser Wire® Kits let you choose your favorite color combinations as well. With this versatility, you are able to get a violet light output by combining our Red and Blue Opal Drives. Unscrew and remove one Opal Drive from the end and you also have the option to change the appearance of your display to put out solely Red or Blue light, or even beautiful Teal gradients by combining Blue and Green modules, or stunning Yellow/Green gradients when combining Red and Green modules. This is something never seen before, and a highly desirable effect in the lighting world. Laser Wire® technology will leave you in awe each time you turn it on.
Due to popular demand, we recently released a new laser module; The Capsule Module. The Capsule Module is a perfect module if you are looking to plug in your Laser Wire® to a 5V source, like wall outlet, laptop, car, or a portable power bank battery. This type of module will run in constant ON mode when it is hooked up to power. It's smaller than our OpalDrives, lightweight, compact and easy to use. This module has more heat sinking than the OpalDrive so we find that if using in Retail or Trade Show Displays, or for long periods of continuous use, the Capsule Module is a great fit. The biggest difference between the OpalDrive and the Capsule Module is that the Capsule module doesn't have an internal battery. Both Laser Modules will be the same color and brightness. Capsule Modules will also work with DMX as well via an inversion cable that can be purchased through our site.
The OpalDrive module includes a rechargeable lithium ion battery which stays powered for up to 20 hours on a single charge (blinking/red). With 3 modes, blink, fade and constant on, the OpalDrive Laser Module is an all-in-one solution for event, trade shows, retail applications, costuming, consumer products and much more! Slide switch on the module allows you to toggle between battery and install mode, where it can be plugged in and run for weeks, months or years on end. The OpalDrive laser module is an all-in one laser module that allows you to use in battery mode, or in "installation mode", where it accepts a PWM frequency to operate. If you plan to plug in the OpalDrive to use wall, computer or automotive 5v power, you'll want to buy the optional OpalDrive Installation Cable as well. If you would like to use it with DMX, we also have DMX Inversion Cables available for purchase.
Estimated Battery Runtime For OpalDrives varies depending on the color. Each color draws a different amount of power. On a Full Battery Charge, the time you can expect it to illuminate before needing to be recharged is as follows:
Blue - 5-10 hours
Green - 4-8 hours
Red - 10-20 hours
Both choices of Laser Modules are awesome, so choose is the best fit for your application. Simply select the laser module type you wish to use in the drop-down menu before adding the product to your cart!