ICE Cool White Opal Drive Laser Wire™ System

ICE Laser Wire® System - Cool White

chauvet SlimPAR Q6 USB Par Can front

Chauvet SlimPAR Q6 USB Par Can

DualDrive ICE Laser Wire® System - Cool White

100 % of 100
As low as $219.99
  • Bright, Even Illumination
  • Silent Operation & Rich, Vibrant Color
  • Externally Controllable (Capsule)
  • Easily Embed Light Into Woods, Metals & Plastics
  • Portable Power Designed For Wearables (OpalDrive)
Availability: In stock
Only %1 left

The DualDrive Ice Cool White OpalDrive Laser Wire® System is great when you need a longer span of cabling than our 2.5 or 5 meter kits. Shorter lengths of Ice Laser Wire® Cabling can be powered with one module, but anything above 5 meters for this specific type of cabling will require a second Laser Module to be attached to the opposite end for full and even illumination.

With this DualDrive Kit, your cable will have one connector attached to each end of the Cable. This DualDrive System will allow for an increase in brightness when compared side by side with a single Laser Wire® Ice System of the same length. The option of a DualDrive 2.5 or 5 meter kit, allows you to double the amount of illumination on a single run of Cabling, as well as a brighter light will be emitted from the Laser Wire® Cabling. The option of using 2 Laser Modules is essential for products that demand longer lengths, or will be used in brighter settings. Laser Wire® Cable is perfect for use in a variety of situations, and in projects that demand a brighter light than Electroluminescent technology can offer. Want even more light? Try out or 70mW high output modules for even MORE POWER (Ugh-Ugh-Ugh)...

The OpalDrive Wearable Module includes a rechargeable lithium ion battery which stays powered for up to 6 hours on a single charge (blinking/red). With 3 modes, blink, fade and constant on, the OpalDrive Wearable Laser Module is an all-in-one solution for event, trade shows, retail applications, costuming, consumer products and much more! This module can also be recharged with a micro-USB device, like Power Bank type battery for even longer lasting charge. 

Estimated Battery Runtime For OpalDrives varies depending on the color. Each color draws a different amount of power. On a Full Battery Charge, the time you can expect it to illuminate before needing to be recharged is as follows:
Blue - 2-4 hours
Green - 2-4 hours
Red - 3-6 hours

Due to popular demand, we recently released a new laser module; The Capsule Module. The Capsule Module is a perfect module if you are looking to plug in your Laser Wire® to a 5V source, like wall outlet, laptop, car, or a portable power bank battery. This type of module will run in constant ON mode when it is hooked up to power. It's smaller than our OpalDrives, lightweight, compact and easy to use. This module has more heat sinking than the OpalDrive so we find that if using in Retail or Trade Show Displays, or for long periods of continuous use, the Capsule Module is a great fit. The biggest difference between the OpalDrive and the Capsule Module is that the Capsule module doesn't have an internal battery. Both Laser Modules will be the same color and brightness. Capsule Modules are externally controlled via PWM, and can be hooked up to LED DMX Decoders for easy external dimming.

Both choices of Laser Modules are awesome, so choose the best fit for your application. Simply select the laser module type you wish to use in the drop-down menu before adding the product to your cart!

More Information
Manufacturer Future Illuminations

Laser Wire® brand cable Length: 2.5M (8.2ft), 5 Meters (16.4 ft) 

Laser Wire® brand cable Diameter: 0.9mm (900um)

Opal Drive Dimensions: 65x24x12mm 
Capsule Dimensions: 50mm x 14m DIA (500mm Cable Length) with USB Male A
Input Voltage: 5V DC
Output Voltage: 3.7V DC
Laser Power: 20mW
Laser Class: Class 3a (No USA Variance Required)

Product Video
Write Your Own Review
You're reviewing:DualDrive ICE Laser Wire® System - Cool White
Your Rating