Outdoor Grade Split EL Tape Connector Set

Split Tape HD Connector

Electric Optics Split EL Tape By The Foot 1

5 feet of Split EL Tape - 1" Width

5 feet of Split EL Tape - 1.5" Width

Split EL Tape By The Foot 1.5" Wide is perfect for linear accent lighting in hallways, Hollywood movie sets, theater lighting, stage performances and much more. Its bright, even glow is perfect for countless applications...
$119.99
Availability: In stock
SKU
LTE015

** PLEASE NOTE MINIMUM ORDER FOR SPLIT TAPE IS 5FT IN ANY WIDTH**

Split EL Tape By The Foot 1.5" Wide is perfect for linear accent lighting in hallways, Hollywood movie sets, theater lighting, stage performances and much more. Its bright, even glow is perfect for countless applications and has been featured across the world. Split EL Tape has a light output of about 30-35 Foot Lamberts which is about double the brightness over our previous version.

This tape is perfect for hallways, movie sets, bars, stair lighting, or to wear out at night to be seen. This tape operates on a different voltage and frequency than our EL Wire Inverters and Battery Packs, so make sure you order either the correct Split 9V EL Tape Battery Pack or Split EL Tape Inverter. These specialized inverters runs off of a different voltage and frequency which allows a brighter tape, as well as longer battery life. Over time, your tape will last longer with our specially crafted inverters as well. The one downside is that our Split EL Tape Inverters do NOT work in conjunction with EL Wire, TruEL™ Wire, or VynEL™ products without a parallel EL Inverter.

1.5" Wide Split EL Tape has a glowing surface of 1.5" and an overall width of 2".

Please Note: EL Tape By The Foot Does Not Come With The Connection Made. The connection does require the use of a soldering iron.

MAKE SURE TO GET A SPLIT EL TAPE INVERTER!! PARALLEL INVERTERS WILL MAKE YOUR TAPE 1/4 THE BRIGHTNESS.

If you need a Molex Connection assembled for you please click here. Also check out our new Split Tape Connectors here!

More Information
Manufacturer Light Tape
Specs
  • Extremely easy to install
  • Generates very little or almost no heat
  • Consumes less power (up to 93% less power)
  • Thin and flexible, typical thickness of 0.020 in (0.5 mm)
  • No glass to break or gas to escape
  • Provides uniform lighting over a large area as long as 300 feet (91 m)
  • Available in multiple colors
  • Can be mounted conformably on curved surfaces
  • Can be designed to flash selectively or sequentially
  • Interior and exterior capable (when selected)
  • No maintenance
SKU LTE015
Product Video N/A
Write Your Own Review
You're reviewing:5 feet of Split EL Tape - 1.5" Width
Your Rating
electroluminescence