FREE DOMESTIC GROUND SHIPPING ON ORDERS OVER $50 - EXPEDITED SHIPPING ALSO AVAILABLE FOR A FEE.

OpalDrive SUPER POP Laser Wire™ 1M System

Laser Wire® SUPER POP 1M System

DualDrive Multicolored SUPER POP 2M Laser Wire™ System Blue and Green

DualDrive Multicolored 2M SUPER POP Laser Wire® System

DualDrive Multicolored 1M SUPER POP Laser Wire® System

As low as $174.99
Want a bold illuminated solution over a short distance? Want a color besides Red, Green, or Blue? The Dual Drive Laser Wire® System option may be just what you are looking for! Use it for an array of applications and blink between two of your favorite colors...
Availability: In stock
Only %1 left
SKU
LWO030

This unique Laser Wire® System is the brightest in its class. At this one meter length, we use our Super Pop Laser Wire® Cabling Profile. The Super Pop specialty cabling was developed with shorter strands in mind, with customers looking for a pop of light whereever you see fit. Makes ideal accents on retail and tradeshow floors and offers the brightest light output of any of our ready-made systems on the market today. This length is ideal for a variety of creative applications where it is important to create a bold, bright accent or focal point of a display. The DualDrive Laser Wire® Kit is able to retain and transmit the most light of any Laser Wire® System, because it has a connector on each end. This prevents the laser light output from diminishing at either end of the cable. There is a minimal amount of light lost since a laser is shining down the optical glass core from both ends.

Dual Drive Laser Wire® Kits let you choose your favorite color, or combining color gradients just as easily. With this versatility, you are able to get a vibrant violet light gradient by combining our Red and Blue Opal Drives. Unscrew and remove one module from the end and you also have the option to change the appearance of your display to put out solely Red or Blue light, or even beautiful Teal gradients by combining Blue and Green modules, or stunning Yellow/Green gradients when combining Red and Green modules. This is something never seen before, and a highly desirable effect in the lighting world. Laser Wire® technology will leave you in awe each time you turn it on. 

The OpalDrive Wearable Module includes a rechargeable lithium ion battery which stays powered for up to 6 hours on a single charge (blinking/red). With 3 modes, blink, fade and constant on, the OpalDrive Wearable Laser Module is an all-in-one solution for event, trade shows, retail applications, costuming, consumer products and much more! This module can also be recharged with a micro-USB device, like Power Bank type battery for even longer lasting charge. 

Estimated Battery Runtime For OpalDrives varies depending on the color. Each color draws a different amount of power. On a Full Battery Charge, the time you can expect it to illuminate before needing to be recharged is as follows:
Blue - 2-4 hours
Green - 2-4 hours
Red - 3-6 hours

opaldrive laser wire kit

The Capsule Module (below) is a perfect module if you are looking to plug in your Laser Wire® to a 5V source, like AC Adapter Wall outlet, laptop, car USB (or even directly to the battery with a 12-5V Step Down Converter), or a portable power bank battery to bring your Laser Wire® kit on the go like in a wearable. This type of module will run in constant ON mode when it is hooked up to power.

opaldrive laser wire kit

This module has more heat sinking than the OpalDrive so we find that if using in Retail or Trade Show Displays, or for long periods of continuous use, the Capsule Module is a great fit. The biggest difference between the OpalDrive and the Capsule Module is that the Capsule module doesn't have an internal battery. Both Laser Modules will be the same color and brightness. Capsule Modules are externally controlled via PWM, and can be hooked up to LED DMX Decoders, Laser Wire Remote Dimmer, or microprocessors (like Arduino, Raspberry Pi's, etc.) for easy external dimming.

Both choices of Laser Modules are awesome, so choose the best fit for your application. Simply select the laser module type you wish to use in the drop-down menu before adding the product to your cart!

laser wire gradient

laser wire green and red effect

More Information
Manufacturer Future Illuminations
Specs

Laser Wire® brand cable Length: 1 Meter (39")

Laser Wire® brand cable Diameter: 0.9mm (900um)


Opal Drive Dimensions: 65x24x12mm 
Capsule Dimensions: 50mm x 14m DIA (500mm Cable Length) with USB Male A
Input Voltage: 5V DC
Output Voltage: 3.7V DC
Laser Power: 20mW
Laser Class: Class 3a (No USA Variance Required)

SKU LWO030
Product Video
Write Your Own Review
You're reviewing:DualDrive Multicolored 1M SUPER POP Laser Wire® System
Your Rating