FREE DOMESTIC GROUND SHIPPING ON ORDERS OVER $50 - EXPEDITED SHIPPING ALSO AVAILABLE FOR A FEE.

Electric Optics Split EL Tape By The Foot 2

5 feet of Split EL Tape - 2" Width

Electric Optics Split EL Tape By The Foot 1/2

5 feet of Split EL Tape - 1/2" Width

5 feet of Split EL Tape - 1/4" Width

Split EL Tape in 1/4" width is a great accent for many applications; pinstriping, prototyping, and cove lighting, just to name a few. It's thin width is a neat way to illuminate a thin line anywhere you see fit.
Availability: Out of stock
Only %1 left
SKU
LTE025

** PLEASE NOTE MINIMUM ORDER FOR SPLIT TAPE IS 5FT IN ANY WIDTH**

Split EL Tape By The Foot 1/4" Wide is a great accent for many applications; pinstriping, prototyping, and cove lighting, just to name a few. It's thin width is a neat way to illuminate a thin line anywhere you see fit. Great for hallways, stage and safety lighting, movie theater lighting and more.

This tape runs off of a different frequency than our EL Wire Inverters, so make sure you order the correct Split EL Tape Inverter. These specialized inverters runs off of a different voltage and frequency which allows a brighter tape, as well as longer battery life. Over time, your tape will last longer with our specially crafted inverters as well. The one downside is that our Split EL Tape Inverters do NOT work in conjunction with EL Wire, VynEL™ or TruEL™ Wire without using a parallel EL inverter in conjunction.

1/4" EL Tape has a glowing surface of 1/4" and an overall width of 3/4".

Please Note: EL Tape By The Foot Does Not Come With The Connection Made. The connection does require the use of a soldering iron.

MAKE SURE TO GET A SPLIT EL TAPE INVERTER!! PARALLEL INVERTERS WILL MAKE YOUR TAPE 1/4 THE BRIGHTNESS.

If you need a Molex Connection assembled for you please click here. Also check out our new Split Tape Connectors here!

More Information
Manufacturer Light Tape
Specs
  • Extremely easy to install
  • Generates very little or almost no heat
  • Consumes less power (up to 93% less power)
  • Thin and flexible, typical thickness of 0.020 in (0.5 mm)
  • No glass to break or gas to escape
  • Provides uniform lighting over a large area as long as 300 feet (91 m)
  • Available in multiple colors
  • Can be mounted conformably on curved surfaces
  • Can be designed to flash selectively or sequentially
  • Interior and exterior capable (when selected)
  • No maintenance
SKU LTE025
Product Video N/A
Write Your Own Review
You're reviewing:5 feet of Split EL Tape - 1/4" Width
Your Rating